CLLPS - EPOXY POLYAMIDE PAINT, GREEN PRIMER

  • MSDS: CLLPS
  • Manufacturer: PRO LINE PAINT CO
  • Product Name: EPOXY POLYAMIDE PAINT, GREEN PRIMER
  • National Stock Number: 8010-01-350-4742
Product Identification

Product ID:EPOXY POLYAMIDE PAINT, GREEN PRIMER
MSDS Date:03/31/1998
FSC:8010
NIIN:01-350-4742
Status Code:A
MSDS Number: CLLPS

Responsible Party
PRO-LINE PAINT CO
2646 MAIN STREET
SAN DIEGO, CA 92113-3697
US

Emergency Phone: 1-800-535-5053

Info Phone: 619-231-2313; 619-232-8968

Preparer: ERNEST CARTER

Cage: 9D157

Contractor
PRO-LINE PAINT CO
SAN DIEGO, CA 92113-3697 US

Telephone: 619-231-2313; 619-232-8968

Cage: 9D157

Ingredients

HARDENER-AMIDO AMIDE


TETRAETHYLENEPENTAMINE

CAS: 112-57-2

RTECS: KH8585000


POLYAMINE AMID


RESIN HARDENER POLYAMIDE


RESIN SOLUTION,


N-BUTYL ALCOHOL

CAS: 71-36-3

RTECS: EO1400000

OSHA PEL 300 MG/M3;100 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


TRIETHYLENETETRAMINE

CAS: 112-24-3

RTECS: YE6650000


MODIFIED POLYAMIDE RESIN


RHEOLOGICAL ADDITIVE


MAGNESIUM SILICATE HYDRATE


N-BUTYL ALCOHOL


TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3

ACGIH TLV: 10 MG/M3


YELLOW IRON OXIDE

CAS: 1317-61-9


EPICHLOROHYDRIN BIS PHENOL A


EPOXY RESIN

CAS: 25068-38-6

RTECS: CE6880000


RHEOLOGICAL ADDITIVE


AROMATIC HYDROCARBON MIXTURE

CAS: 64742-95-6

RTECS: WF3400000


XYLENE

CAS: 1330-20-7

RTECS: ZE2100000

ACGIH TLV: 434 MG/M3;100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


TRIMETHYLBENZENE

CAS: 25551-13-7

RTECS: DC3220000

OSHA PEL 25 PPM

ACGIH TLV: 123 MG/M3;25 PPM


CUMENE

CAS: 98-82-8

RTECS: GR8575000

OSHA PEL 245 MG/M3;50 PPM

ACGIH TLV: 246 MG/M3;50 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


MAGNESIUM SILICATE HYDRATE


ALUMINUM SILICATE

CAS: 66402-68-4

Hazards

Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NAUSEA, DIZZINESS, HEADACHE AND
CONVULSIONS. CHRONIC: POSSIBLE SKIN SENSITIZATION.
Effects of Overexposure:INHALED: COUGHING, SHORTNESS OF BREATH, MAY
CAUSE DIZZINESS. CONTACT WITH SKIN OR EYES: BURNING SENSATION, RASH
BREAKOUT WITH SKIN TURNING PINK AND REDNESS OF EYES. ABSORBED
THROUGH SKIN: SKIN RASH MA Y CAUSE BURNING OF SKIN AND
INFLAMMATION. SWALLOWED: VOMITING DUE TO UNPLEASANT TASTE. MAY
CAUSE DIARRHEA OR STOMACH CRAMPS.
Medical Cond Aggravated by Exposure:ASTHMA, EMPHYSEMA AND OTHER
RESPIRATORY DISEASES.

First Aid

First Aid:EYE CONTACT: FLUSH IMMEDIATELY WITH FRESH WATER BY AN EYE
WASH APPARATUS OR BY HAND. SEEK MEDICAL ATTENTION. SKIN CONTACT:
WASH IMMEDIATELY WITH WATER. THEN WASH WITH SOPA AND WATER, RINSE
IMMEDIATELY . IF BURNING SENSATION RASH BREAKOUT, OR OTHER SYMPTOMS
OCCUR SEEK MEDICAL ATTENTION. INHALED: MOVE PERSON TO FRESH AIR;
ARTIFICIAL RESPIRATION IF NECESSARY. SEEK MEDICAL ATTENTION.
SWALLOWED: SEEK M EDICAL ATTENTION.

Fire Fighting

Flash Point Method:SCC
Flash Point:=38.3C, 101.F
Lower Limits:1.4%
Upper Limits:11.2%
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:BLANKET FLAME WITH ONE OF THE ABOVE. DO NOT
ENTER FIRE AREA WITHOUT PROPER PROTECTION AND EQUIPMENT. INCLUDING
NIOSH APPROVED SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:KEEP MATERIAL AWAY FROM HEAT, SPARKS,
OPEN FLAMES. EXPLOSIVE WHEN HEATED. STAY A SAFE DISTANCE FROM FIRE
WHEN EXTINGUISHING.

Accidental Release

Spill Release Procedures:REMOVE ALL TYPES OF IGNITION SOURCES. PROVIDE
SUFFICIENT VENTILATION. PROTECT CLEANUP MAN WITH NIOSH APPROVED
RESPIRATOR, GOGGLES AND RUBBER GLOVES.
Neutralizing Agent:THIS PRODUCT'S INGREDIENTS ARE FOUND IN THE LISTS
BELOW.

Handling

Handling and Storage Precautions:PROTECT AGAINST PHYSICAL DAMAGE TO
CONTAINERS AND SPILLAGE. STORE IN A COOL WELL VENTILATED AREA WITH
SPRINKER SYSTEM. KEEP AWAY FROM HEAT. POST NO SMOKING SIGNS.
Other Precautions:REPORTS HAVE SHOWN THAT ASSOCIATED REPEATED AND
PROLONGED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS CAN CAUSE PERMANENT
BRAIN AND NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING AN D INHALING THE CONTENTS MAY BE HARMFUL OR FATAL.
USE ONLY WITH ADEQUATE VENTILATION.

Exposure Controls

Respiratory Protection:USE DUST/MIST RESPIRATOR (HIGH EFFICIENCY
CARTRIDGES ADVISED) IF SPARYING OR SANDING. USE NIOSH APPROVED
ORGANIC VAPOR AND SPRAY PRE-FILTER IF TLV FOR SOLVENT COMPONENTS
MAY BE EXCEEDED. WHEN USING IN CONFINED AREA, WEAR AIR-FED HOOD.
Ventilation:USE LOCAL EXHAUST WHEN APPLYING THIS PAINT IN CONFINED
AREAS. KEEP VAPORS BELOW TLV.
Protective Gloves:RUBBER GLOVES.
Eye Protection:GOGGLES WITH SIDE SHIELD.
Other Protective Equipment:USE PROTECTIVE CLOTHING AND CHANGE
CONTAMINATED CLOTHING IMMEDIATELY. PROVIDE EMERGENCY SHOWERS AND
EUEWASH AT STATIONARY PAINT APPLICATION FACILITIES.
Work Hygienic Practices:TRAIN EMPLOYEES ON ALL SPECIAL HANDLING
PROCEDURES IN THIS SECTION BEFORE THEY WORK WITH THIS PRODUCT.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:=117.8C, 244.F
Melt/Freeze Pt:=53.3C, 128.F
Vapor Pres:4.4 AT 60 F
Vapor Density:2.1
Spec Gravity:1.3
VOC Pounds/Gallon:340
Evaporation Rate & Reference:BUTYL ACETATE=1, .43
Solubility in Water:POOR
Appearance and Odor:TYPICAL PAINT APPEARANCE WITH STRONG SOLVENT ODOR
TYPICAL OF BUTANOL

Stability

Stability Indicator/Materials to Avoid:YES
WHEN "A" & :B: ARE MIXED, KEEP AWAY FROM HEAT. HEAT WILL CREATE A
RAPID CHEMICAL REACTION. EMITS HEAT.
Stability Condition to Avoid:HEAT, SPARKS AND OPEN FLAMES. DO NOT ALLOW
VAPOR TO ACCUMULATE.
Hazardous Decomposition Products:(INCLUDING COMBUSTION PRODUCTS):
COMBUSTIBLE FUMES MAY ACCUMULATE IN CONFINED AREA AND SPARKS OR
OPEN FLAMES MAY IGNITE IT.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:(CONTAINER TYPES, NEUTRALIZATION, ETC.): USE
METAL CONTAINER MARKED "DO NOT REUSE". PUT THE MATERIAL IN THIS
CONTAINER. USE VERMICULITE OR OTHER INERT ABSORBENT. KEEP AWAY FROM
SEWER. NOTE: DISPOSE O F ALL WASTES IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS.

Other Information

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.